BEDROCK STONE
SAVER
DESCRIPTION:
Stone Saver is an easy to apply,
single component, water based polymer. It
is a stain resistant, penetrating sealer that will not change the appearance
of concrete, stone, brick or other porous natural surfaces.
Stone Saver’s composition is known for its chemical and thermal
stability, low toxicity and its ability to repel oil, water, grease and soil.
It inhibits stain causing liquids from penetrating and discoloring
porous surfaces.
USE:
Stone Saver protects stone floors from
oil based stains, water and ordinary soil.
It is
used indoors on natural stone, granite, slate or other porous natural
surfaces.
Stone saver is used when stain protection
is required while maintaining the natural, unaffected look of the stone.
Time consuming conventional maintenance methods of waxing, stripping
and buffing are not needed.
 | - High Traffic Areas |
| - Porous Surfaces (natural material) |
| - Garage Floors, Driveways and
Maintenance Areas |
| - Food Dispensing and Consumption
Areas |
ADVANTAGES:
| - PENETRATES DEEP INTO SURFACES |
| - LOCKS OUT OILS, WATER, SALTS AND
SOIL |
| - BARRIER FORCES LIQUID TO BEAD UP TO
THE SURFACE |
| - SPILLS ARE EASY CLEANED, PREVENTING
STAINS |
LIMITATIONS:
For interior use only.
BEDROCK “STONE SAVER”
PHYSICAL PROPERTIES / TECHNICAL DATA
| Appearance | Light yellow to amber |
| Percent actives (weight %) | <10% |
| Viscosity | <30CPS |
| Density | 1.1 g/ml |
| VOC (ASTM 3960-89) | 2-50 g/l |
| pH | 6-8 |
| Boiling Point | 100 deg. C |
| Vapor Pressure | 18 mm Hg calc. @ 20 deg. C |
| Evaporation Rate | 1 Water = 1 |
| Coverage Rate (depending on porosity) | 150 to 400 sq.ft. per gallon |
APPLICATION
INSTRUCTION:
Stone
Saver is applied by spraying, flooding, rolling or brushing. Highly porous substrates such as concrete require two coats.
Apply the second coat when the first coat looks dry (10 to 30 minutes.)
On less porous material, excess dry coating will produce a slight haze
which can be easily removed by buffing with a cloth.
The suggested coverage rate for less porous material is 150 to 400 sq.ft./gallon. It may be necessary to recoat the floor every 1 to 3 years.
Do not dilute Stone Saver.
STORAGE:
Stone
Saver is stable to repeated freezing and thawing.
Shelf life is one year. It
is classified as a non-hazardous and non-flammable product by the Department of
Transportation.
Although
no protective treatment can guarantee to eliminate every stain, Stone Saver
offers you the most complete protection available against the most commonly
encountered types of stains.
“Warranties:
Seller warrants that its goods, as described on the face hereof, are free from
any defect in material or workmanship. Seller
makes no other warranty, expressed or implied, and all implied warranties of
merchantability and fitness for a particular purpose are hereby disclaimed.
Seller shall not be liable for prospective profits or special indirect or
consequential damages. Seller’s
sole liability and buyer’s exclusive remedy for breach of any warranty is
expressly limited, at seller’s option, to replacement at the original F.O.B.
point or refund of purchase price. Seller
shall not be responsible for any claim resulting from failure to utilize product
in the manner in which it was intended and in accordance with instructions
provided for use of product. Any
claim for breach of warranty shall be deemed waived unless buyer shall give
seller written notice of such claim within (60) days after delivery and shall
allow seller reasonable opportunity to investigate claim and inspect product.”